Reliability of the Bond Graph Approach for Robust Diagnosis of a Newborn Incubator System
Keywords:
TELEMAC; SISYPHE; bed roughness; Shield coefficient; bed load transport formulae; Gain Size; hydromorphological modeling; sediment transport; numerical simulation; river engineering., Incubator, robust diagnosis, bond graph approach, linear fractional transformations, analytical redundancy relationsAbstract
This article aims to solve a problem of research with a thermal system (incubator) to the graph of pseudo-connections. The method we develop is based on the determination of the resolution on the model ARR-BGM (Analytical Redundant Relationships Bond Graph). These relationships serve to detect and isolate faults in the various elements of the system, but also to locate the industrial system. We introduced defects in the heat source, leaks in the incubators and a leak in the incubator door; these defects were transferred by thermal transfer to negative values. The results of simulation, the effectiveness of proposed method to detect and locate defects, in addition, to analyze the robustness of the Incubator to defects, we imported the graphical link model as linear fractional transformations (BG-LFT). This makes it possible to verify the reliability of the approach of the link graphs in terms of sensitivity and detectability of defects that may appear in an industrial system.
References
Valentin Gies, Thierry Soriano (2019) Modeling and Optimization of an Indirect Coil Gun for Launching Non-Magnetic Projectiles. 8-39.
Tho N.H.T. Tran, Lawrence H. Le, Vu-Hieu Nguyen, Kim-Cuong T. Nguyen, Mauricio D. Sacchi (2015) Sensitivity analysis of leaky Lamb modes to the thickness and material properties of cortical bone with soft tissue: A semi-analytical finite element based simulation study. 1-4.
Tai Le, Hervé Colin, Franck Al Shakarchi, Tuan Tran Quoc Quoc (2018) Improved Matlab Simulink Two-diode Model of PV Module and Method of Fast Large-Scale PV System Simulation. 982 - 985.
Naima Sakami, Lahcen Boukhattem, Hassan Hamdi (2016) Dynamic modelisation of heat transfer between the ground and shallow basement of a villa in Marrakesh area. 867–871.
M. Shaib, M. Rashid, L. Hamawy, M. Arnout, I. El Majzoub, A. J. Zaylaa (2017) Advanced portable preterm baby incubator. 1-4.
Rebecca Hirte, Jürgen Münch, Laura Drost (2017) Incubators in Multinational Corporation's development of a corporate incubator operator model. 195 – 202.
Gamze Tilbe Sen, Mehmet Yüksekkaya (2018) Desing and Test of an Incubator Analyzer. 1-5.
B. Ashish (2017) Temperature monitored IoT based smart incubator. 497–501.
Muslim Ali, Murtada Abdelwahab, Sally Awadekreim, Suliman Abdalla (2018) Development of a Monitoring and Control System of Infant Incubator. 1-4.
Bibo Dai, Hongting Wang (2017) Operation Efficiency Evaluation of Science and Technology Enterprise Incubator. 38–42.
Arif Widianto, M. Raditya Gumelar, Pradipta Mahatidana, Rizky Ramadian Wijaya, Intan Nurfitri, Kresna Devara, Retno Wigajatri Purnamaningsih (2017) The effect of moving load on remote weight monitoring system for simple infant incubator. 1-4.
Dhanesh Kattipparambil Rajan, Jarmo Verho, Joose Kreutzer, Hannu Välimäki, Heimo Ihalainen, Jukka Lekkal, Mimmi Patrikoski, Susanna Miettinen (2017) Monitoring pH, temperature and humidity in long-term stem cell culture in CO2 incubator. 470 – 474.
Nor Asmidar, Natasha Binti, Mohd Fudzi, Nurmiza Binti (2016) Development of infant incubator for clinic in the rural area of Malaysia. 331'334.
Kubilay Tan, Ahmet Reşit Kavsaoğlu, Onur Koçak, Cansu Akbay (2018) Remote Monitoring System For Incubator Data. 1-4.
Megha Koli, Purvi Ladge, Bhavpriya Prasad, Ronak Boria, Prof. Nazahat J. Balur (2018) Intelligent Baby Incubator. 1036 – 1042.
B. Li, B. Liu, A. Toguyéni (2015) On-the-fly Diagnosability Analysis of Labeled Petri Nets Using Minimal Explanations.
Estrada-Vargas A.-P., Lesage J.-J, Lopez-Mellado E. (2013) Identification of Partially Observable Discrete Event Manufacturing Systems.
Tapia-Flores T., Lopez-Mellado E., Estrada-Vargas A.-P., Lesage J.-J. (2014) Petri Net Discovery of Discrete Event processes by Computing T-invariants.
H. Leroux, D. Andreu, K. Godary-Dejean (2015) Handling exceptions in petri net-based digital architecture: from formalism to implementation on fpgas. 11(4), 897–906.
H. Leroux, K. Godary-Dejean, D. Andreu (2013) Complex digital system design: A methodology and its application to medical implants. 94–107.
B. Li, A. Toguyéni, M. Khlif-bouassida (2015) On-the-fly Diagnosability Analysis of Labeled Petri Nets Using T-invariants.
Sankaranarayanan S., Sipma H. B., Manna Z. (2004) Petri Net Analysis Using Invariant Generation. 682-701.
Geeraerts G., Raskin J.-F., Van Begin L. (2007) On the efficient Computation of the Minimal Coverability set of Petri nets. 98-113.
Ju Biao Yao, Zhu Ming Cao, Jia Tian Guo (2018) The Research of Hybrid Bond Graph Modeling. 1087, 052013. https://doi.org/10.1088/1742-6596/1087/5/052013
Belkacem Ould Bouamama, Ibrahim Abdalah, Anne-Lise Gehin (2018) Bond Graphs as Mechatronic Approach for Supervision Design of Multisource Renewable Energy System. 417.
S. Samaddar, P. Kushwaha, S. K. Ghoshal (2018) Bond graph modelling and simulation of a variable inertia flywheel. 377, 012206. https://doi.org/10.1088/1757-899X/377/1/012206
W. Borutzky (2017) Bond graphs for modelling, control and fault diagnosis of engineering systems.
M. Bendaoud, H. Hihi, K. Faitah (2018) Structural Controllability of Switched Linear Singular Systems Modelled by Bond Graph. 38, 26-45.
Abdallah I., Gehin A-L, Bouamama BO (2016) Functional hybrid bond graph for operating mode management. 327e32.
Gawthrop P. J., Bevan G. P. (2007) Bond-graph modeling. 24e45.
Simon BN Jr, Reddy NP, Kantak A (1994) A theoretical model of infant incubator dynamics. 116(3), 263-9.
Pauline Décima, Loïc Dégrugilliers, Stéphane Delanaud, Erwan Stephan, Jean-Luc Vanhée, J.-P. Libert (2012) Conception d'un logiciel de calcul de la thermoneutralité dans les incubateurs fermés pour nouveau-nés prématurés (projet Pretherm®). 33(2), 48–54.
Mohamed aymen Zermani, Feki Elyes, Abdelkader Mami (2014) Building simulation model of infant-incubator system with decoupling predictive controller. 35(4).
Andrés Fraguela, Francisca Matlalcuatzi, Ángel M. Ramos (2015) Mathematical modelling of thermoregulation processes for premature infants in closed convectively heated incubators. 159-72.
Stéphane Delanaud, Pauline Decima, Amandine Pelletier, Jean-Pierre Libert, Estelle Durand, Erwan Stephan-Blanchard, Véronique Bach, Pierre Tourneux (2017) Thermal management in closed incubators: New software for assessing the impact of humidity on the optimal incubator air temperature. 98-95.
J. S. Ultman, S. Berman, P. Kirlin, J.M. Vireslovic, C.B. Baer, K.H. Marks (1988) Electrically heated simulator for relative evaluation of alternative infant incubator environments. 22(1), 33-8.
M. H. LeBlanc (1987) The physics of thermal exchange between infants and their environment. 21(1), 11-15.
Saumya Ranjan Sahoo, Shital. S. Chiddarwar (2018) Mobile Robot Control Using Bond Graph and Flatness Based Approach. 213–221.
Vijay P, Samantaray A, Mukherjee A (2009) Bond graph model-based evaluation of a control scheme to improve the dynamic performance of a solid oxide fuel cell. 19, 489e502.
Vijay P, Samantaray A, Mukherjee A (2008) Bond graph model of a solid oxide fuel cell with a c-field for mixture of two gas species. 222, 247e59.
Hassan Javed, A. Mahmood (2013) A Study of Thermodynamics and Bond Graph Modelling of Evaporation in Infant Incubator.
H. Paynter (1961) Analysis and design of engineering systems.
S. Ben Mabrouk, H. Oueslati, R. Andoulsi (2013) Bond-Graph modelling of water evaporation in a convective solar dryer. 1-12.
D.C. Karnopp, R.C. Rosenberg (1983) Systems Dynamics: a Unified Approach.
R.C. Rosenberg (1983) Introduction to physical System Dynamics.
M. Tagina, G. Dauphin Tanguy (2003) La méthodologie bond graph. Principes et applications.
A. Sallami, N. Zanzouri, B. OuldBouamama (2016) Robust Supervision of Industrials Systems by Bond Graph and External Models. 5, 245–258.
A. Sallami, N. Zanzouri, K. Mekki (2012) Robust Fault Diagnosis Observer of Dynamical Systems Modelled by Bond Graph Approach. 12, 415–420.
M.A. Djeziri, B. OuldBouamama, R. Merzouki (2009) Modelling and robust FDI of steam generator using uncertain bond graph model. 19, 149-162. https://doi.org/10.1016/j.jprocont.2007.12.009
Z. Han, W. Li, S.L. Shah (2002) Fault detection and isolation in the presence of process uncertainties. 1887-1892.
D. Henry, A. Zolghari (2006) Norm-based design of robust FDI schemes for uncertain systems under feedback control: Comparison of two approaches. 14, 1081-1097. https://doi.org/10.1016/j.coneng-prac
M.A. Djeziri (2007) Diagnostic des systèmes incertains par l'approche bond graph.
D. Alazard, C. Cumer, P. Apkarian, M. Gauvrit, G. Fereres (1993) Robustesse et Commande Optimale. 348.
A. Oustaloup (1994) La robustesse.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Authors and Global Journals Private Limited
This work is licensed under a Creative Commons Attribution 4.0 International License.
